Sanitary rapid test system

Hygienic rapid detection system product introduction: 
Hygienic rapid detection system is also called WIFI version ATP fluorescence detector, microbial bacteria detector, hygienic rapid detection system can detect a constant amount of ATP in living cells, so the ATP content can clearly indicate the microorganisms in the sample How much with other biological residues is used to judge the health status. The device is a brand-new upgraded product with an Android smart operating system. The operation uses a biochemical reaction method to detect the ATP content. The ATP fluorescence detector is based on the principle of firefly luminescence, and uses the "luciferase-luciferin system" to quickly detect adenosine triphosphate (ATP). The ATP swab contains a reagent that can crack the cell membrane, which can release the ATP in the cell, react with the specific enzyme contained in the reagent to generate light, and then detect the luminescence value with a fluorescent illuminance meter. The number of microorganisms is proportional to the luminescence value.

Sanitation rapid detection system application:
Fengtu ATP fluorescence detector is widely used in: bacterial microorganism detection, medical hygiene, food safety, market law enforcement, surface cleanliness detection, medical epidemic prevention, water quality and water policy, production line sanitation, industrial water treatment, environmental protection detection , Customs entry-exit quarantine and other law enforcement agencies and other industries.

Hygienic rapid detection software platform:
the instrument also has wifi networking function, bluetooth transmission, data cable connection to computer multiple upload methods, and is equipped with an online monitoring platform. Historical data can be wirelessly uploaded to the software platform for historical data analysis and statistics. Historical data can present curve trend charts, pie charts, etc. Users' health monitoring and plan management can be realized through the platform. At the same time, it can be instantaneously uploaded to the mobile terminal in the form of excl, which is convenient for mobile phones to share and read data.

Hygienic rapid detection features:
practicability - the upper and lower limits can be set according to the environmental detection requirements, so as to achieve rapid data evaluation and early warning, and rapid screening of surface cleanliness.
High sensitivity - 10-15 ~ 10-18 mol
Fast speed - more than 18-24 hours for conventional culture method, and ATP only takes more than ten seconds.
Feasibility - There is a clear correlation between the number of microorganisms and the ATP contained in microorganisms . By detecting the ATP content, the operability of the number of microorganisms in the reaction can be obtained indirectly
- the traditional culture method needs to be operated by trained technicians in the laboratory; however, the ATP rapid cleanliness test is very easy to operate and only requires simple training. On-site operations can be performed by general staff.
Better experience——The test tube adopts a flexible plug-in design, which can be cleaned regularly for long-term use and prolongs the life of the instrument.
Strong interactivity - Android high-sensitivity touch operation, high-speed data processing chip, faster operation speed and stronger stability.

The main parameters of rapid sanitation detection:   
1. Operating program: Android system, Chinese and English can be switched
2. Display: 3.5-inch high precision graphics touch screen
3, Processor: ARM Cortex-A7, main frequency 1.88Ghz, 4 core high-speed chip
4, detection accuracy: 1×10-18mol
5. Coliform bacteria: 1-106cfu
6, detection range: 0 to 99999 RLUs
7. Detection time: 15 seconds
8, detection interference: ±5% or ±5 RLUs
9, operating temperature range: 5℃ to 40℃
10, operating humidity range: 20-85%
11. ATP recovery rate: 90-110%
12. Detection mode: RLU, coliform screening
13. Data storage: 4G memory can store 100,000 pieces of data
14. 50 user ID Settings
15. Number of configurable result limits: 251
16, automatic judgment of qualified and unqualified
17, automatic statistics qualified rate
18, built-in self-calibration light source
19, boot 30 seconds self test
20, equipped with miniUSB interface, can upload the results to the PC
21. With wifi and Bluetooth transmission functions, the results can be uploaded to the data analysis platform wirelessly
22, at the same time equipped with special software driver U disk instead of the traditional CD
23, instrument size (W×H×D) : 188 mm×77mm×37mm
24, the use of rechargeable lithium battery free battery replacement
25. Standby state (20℃) : 6 months
26. Operation manual in Chinese and English
27. Stable liquid luciferase
28. Moisture-integrated swab collection
Random configuration: ATP fluorescence detector (handheld) host, aluminum alloy carrying case, driving U disk, instrument package, lanyard, PC data cable, data analysis software, Chinese operation manual