Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:FT-SQX1
Brand:fengtu
The tunnel ultrasonic wind speed and direction detector adopts the principle of ultrasonic time difference method to obtain the wind speed and wind direction value in the tunnel.> The tunnel ultrasonic wind speed and direction detector has a cast aluminum body with anodized surface treatment, which is suitable for the harsh environment in the tunnel and has stronger stability. The FT-SQX1> tunnel ultrasonic wind speed and direction detector is a tunnel application type. The detection probe is installed on the tunnel wall to provide the tunnel master control room with the detection value of wind speed and wind direction in the tunnel as the basic basis for ventilation and operation. The detector can observe the operating status and detection data of the instrument in real time on site. At the same time, the analog and switch signals output by the data output interface can be connected to the ground PLC in the nearby sub-control room, and then connected to the main control room through the data optical transceiver and optical fiber.
Main features of tunnel ultrasonic wind speed and direction detector:
1. Cast aluminum body, surface anodized treatment, adapt to the harsh environment in the tunnel
2. The sampling area spans the traffic lane in the tunnel, which more realistically reflects the gas flow rate in the tunnel
3. Using ultrasonic detection principle, not affected by ambient temperature
4. Non-contact detection, no moving parts inside, reducing failure rate
Tunnel ultrasonic wind speed and direction detector installation method:
According to the requirements of the joint design drawings, it is directly installed on the tunnel wall, in the direction of tunnel driving, on the right side of the tunnel wall, at a height of 3 to 4 meters. The transmission signal cable uses two twisted-pair shielded wires or RVVP4*0.3.
Reservoir water level monitoring equipmentDid you know? There is not only one standard of reservoir water level, in order to complete the task of flood control and water storage, reservoirs have various reservoir water levels, such as normal storage level, dead water level, flood control limit level...
A wind sensor is a sensor device used to measure and record the direction of the wind, usually in the fields of meteorology, environmental monitoring and agriculture. It calculates the wind direction by measuring the wind speed and, based on the principles of hydrodynamics. These sensors usually pro...
The Internet of Things in agriculture is playing an increasingly important role in modern agriculture, and one of its fundamental applications is soil moisture monitoring. By accurately obtaining real-time data on the growing environment, we are able to use technologies such as automated control and...
Medical cold storage houses large quantities of pharmaceuticals, which often need to be kept within a specific temperature range to maintain their quality and activity. Because changes in temperature may affect the chemical properties and potency of pharmaceuticals, temperature observations are need...