Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:YW-26B
Brand:fengtu
1. Product principle
The radar level antenna emits narrow microwave pulses which are transmitted downwards through the antenna. After the microwave touches the surface of the measured medium, it is reflected back and received by the antenna system again, and the signal is transmitted to the electronic circuit part to be automatically converted into a level signal (because the microwave propagation speed is extremely fast, the electromagnetic wave reaches the target and returns to the receiver after reflection). The time taken is almost instantaneous).
2. Technical parameters
Product features: PTFE cone antenna
Typical applications: liquids, powders, occasions with high sanitation level, occasions where crystallization, condensation, and oily smoke and dust are easy to adhere to, etc
Measuring range: 30 meters
Antenna material: PTFE (optional)
Accuracy: ±5mm
Process temperature: -40~260℃
Process pressure: -0.1~4.0Mpa
Power supply: 24vDC (two wires, four wires)
Signal output: 4~20mA/Har (two wires/four wires)
RS485/Modbus
Process connection: flange (≥ DN50 optional)
Protection class: IP67
Frequency range: 26GHz
Protection class: IP67
Explosion-proof grade: ExiaⅡC T6 Ga/Exd ia IIC T6 Gb
On-site display: LED (standard configuration)
Cable entry: M20*1.5, ½ NPT (optional)
Shell material: cast aluminum, 304 stainless steel (optional)
3. Product Features
The antenna is small in size and easy to install; non-contact radar, no wear and pollution.
Almost unaffected by corrosion and foam; almost unaffected by changes in water vapor, temperature and pressure in the atmosphere.
Severe dusty environment has little effect on the work of high frequency level meter.
Shorter wavelengths provide better reflection from inclined solid surfaces.
The beam angle is small and the energy is concentrated, which enhances the echo capability and helps avoid interference objects.
The measurement blind area is smaller, and it will also achieve good results for the measurement of small tanks.
High signal-to-noise ratio for better performance even in fluctuating conditions.
High frequency, the best choice for measuring solid and low dielectric constant media.
Owing to a variety of factors such as topography, vegetation cover and man-made structures, special weather phenomena such as hurricanes, frosts and rainstorms may occur in small localised areas, and these phenomena have a significant impact on people's production and life. However, due to the s...
A visibility detector is a device used to measure atmospheric visibility. It helps meteorologists, traffic controllers, pilots, and others to understand the current visibility conditions in the atmosphere so that they can make decisions accordingly.In meteorology, visibility is a key concept that de...
At present, the ultrasonic wind speed and direction meter has become a relatively advanced wind speed and direction measuring instrument. Because it can better overcome the inherent shortcomings of the mechanical wind speed and direction meter, so that it can be all-weather long time normal operatio...
Windway Technology BOD automatic monitor is now available, welcome to consult and order!This is an automatic monitoring instrument of BOD, what is BOD? Its refers to biochemical oxygen demand (biochemical oxygen consumption), there are some aerobic microorganisms in the water body, under certain tem...