ambient weather lightning detector

1.Ambient Weather Lightning Detector product introduction

ambient weather lightning detector detects lightning within 15KM of your location and accurately detects lightning strikes.Ambient Weather Lightning Detector is a all -digital electric field detection and lightning warning platform.Its core electric field detection structure is based on the principle of charge induction, MEMS (micro -electrical system) technology, and easy -to -wear motor mechanical components such as motor.Low, high reliability, easy integration and other outstanding advantages.The system uses a micro -division of the electric field and the threshold threshold to optimize the lightning warning algorithm.Compared with the regular threshold method used in conventional, it is highly probably avoided by misunderstandings caused by interference (rainy/wind/snowy/dust).Accuracy.The early warning of the lightning warning system is accurate, easy to network and convenient installation.It is mainly for the application needs of air -based defense, meteorological, petroleum petrochemical, power grids, scenic spots, mines, oil depots, military and other fields.

2.Ambient Weather Lightning Detector product composition

1.Thunderbolt warning probe

2.Data processing host

3.Solar power supply system

4.Anti -direct lightning system

5.Wave System

6.grounding system

7.Optional function, temperature, humidity, lifting lightning protection needle

3.Ambient Weather Lightning Detector product characteristics

1.Users can connect lightning warning system probes with the computer to achieve the purpose of remote monitoring

2.Through the analysis of the data, make more accurate judgments on the strength and polarity of the Lei Yun still electric field

3.This system can be connected to the sound light alarm system

4.The system software has a complete network transmission function; the data transmission completely follows the network protocol

5.Supporting central monitoring software, users can use a PC to monitor and use it

Fourth, Ambient Weather Lightning Detector technical parameter

 

Equipment name	Lightning early warning system
Electric field measurement range	-30kv/m ~ 30kv/m
Discrimination	20V/m
Accuracy	Better than 5%
Detection distance (radius)	15km
Sensor weight	3KG
gross weight	50kg
Input voltage	24VDC/220VAC
Power consumption	0.65W (sensor); 1.8W (system)
size	300mm (sensor); 1.5m (bracket)
Working temperature	-40 ℃ ~ 55 ℃ (sensor); -20 ℃ ~ 55 ℃ (controller)
Deployment location (indoor/outdoor)	outdoor
Whether to support rack deployment (indoor)	/ /
Height	1.5m (bracket)
Manage interface type	RJ45, RVV
Supportable management (control) function	Level 3 warning threshold settings, outer field coefficient settings
Quantity and type of data interface	1 aviation socket, 1 network interface
External data bandwidth requirements	50Mbps
External data frequency	1S
External data communication protocol	Own protocol

5.Ambient Weather Lightning Detector Installation Precautions

1.Thunderbolt warning probe should be installed on a sunny day

2.Lightning early warning probes should be installed on outdoor without blocking and unobstructed surroundings

3.Do not install it at the exit of the generator, next to the electric pole and under the high -voltage line

4.Under normal circumstances, when protruding from the ground, near an antenna or other equipment, the field strength and the test data may be disturbed

5.Under the wired method, the wiring distance from the outdoor electric field instrument to the indoor host is not recommended to exceed 100 meters

6.For more details, please consult our company

7.If there is a parameter update, it will not be notified separately.The right to technical interpretation is owned by the company

6.Ambient Weather Lightning Detector installation step

1.Take out a full set of lightning warning system from the box

2.Fix the bracket to the specified installation location, and fix it with bolts

3.Connect the ground wire at the top of the lightning needle on the ground.The other side of the ground is introduced from the inside of the bracket.After the grounding pole and other grounding devices are installed, the lightning needle is connected to the ground wire connection.

4.Introduce the line of the atmosphere of the atmosphere from the inside of the bracket, attract from the hole in the middle of the bracket, connect to the main control box, there are three lines in the main control box, connect according to the color, and do the insulation treatment.

5.Fix the solar panel to the bracket, and connect the solar line to the color line according to the color

6.In the control room, the control box will be installed in a suitable location.Generally, you choose to hang the wall.Connect the thread of the alarm to the control box and connect to the control box according to the color.Connect 220V power supply to the air

7.From the front -end main control box to lead a network cable, a control line, access to the control box in the control room according to the interface, connect the network cable and control line according to the interface

8.Open the power supply of the main control box switch and indoor control box switch

9.Open the computer and enter the computer IP IP

This paper addresses：https://www.fengtutec.com/Sensor-encyclopedia/ambient-weather-lightning-detector.html