Radar flowmeters

The Radar Flowmeter is an all-in-one flow monitoring device with non-contact, continuous detection of flow velocity, water level, flow and other parameters. It is the use of radar plane microwave technology in a non-contact way to detect the flow rate, water level and other parameters of the water body. The product can be used in pumping stations, rivers, irrigation channels, underground drainage networks, flood control and early warning non-contact flow measurement; the product has low power consumption, small size, high reliability and easy maintenance; the measurement process is less affected by temperature, sediment, river pollutants and floating objects.

Functional features

1. Non-contact measurement and combined with cross-sectional parameters to calculate the flow rate is not affected by wind, temperature, haze, sediment and floating matter.

2. Suitable for a wide range of measurement conditions and capable of outputting flow velocity, water level and flow rate measurement data.

3. The flow rate and water level are all in a flat array radar antenna structure, the device is small and easy to install.

4. Suitable for trapezoidal, circular and U-shaped cross-sections; easy to set the section parameters and convenient to use;

5. Will not cause damage to the water flow state, to ensure the accuracy of the measurement data.

6. Low power consumption, can be powered by solar energy or battery pack, easy installation and low maintenance workload.

Installation solutions

1,Construction plan design

Before construction, a special designer will design the construction plan for each point according to the actual conditions of the site.

2,Programme evaluation

After the construction plan is designed, it will be handed over to the owner's professional staff to review the plan and arrange the personnel to enter the site after the review is qualified, otherwise the plan will be optimized until the review is qualified.

3、Selection of the installation site

The installation site was selected and the installation materials were prepared according to the equipment deployment principles and specific monitoring needs.

As velocity measurements are more sensitive to attitude changes, certain conditions need to be met during installation.

The radar flow meter needs to be installed and fixed at a designated location, the exact method of which can be requested from the technical staff.