Shandong Fengtu IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
PRODUCT CENTER
-
Sensors
-
Weather Station
-
Hydrological/Water Quality Monitor
-
Smart Agriculture
-
Road Weather Information System
-
Photovoltaic Inspection
-
Environmental monitoring
-
Operating condition monitoring
-
Plant Physiology Equipment
-
Food Testing Equipment
Recommended articles
- Viscosity Sensor Rapid Response to Fluid Changes via Tuning Fork Resonance Technology
- Handheld Digital Depth Sounder Achieving Precision Depth Measurement via Acoustic Round-Trip Time
- Environmental Sensors Outputs Six Environmental Parameters via RS485 Interface
- Water Depth and Temperature Detector Maintains Measurement Accuracy Even in Flowing Water
- Air quality sensor Offering Integrated Multi-Parameter Monitoring Capabilities for Environmental Surveillance
- Boat Depth Finder can simultaneously display water depth, water temperature, and latitude/longitude coordinates on the screen
Contact us
Working Principle of High Frequency Radar Level Meter
time：2023-09-08 16:51:49 source：Weather Station viewed：919 time
The working principle of high frequency radar level meter:
FM continuous wave radar level meter general principle is the radar to the top of the tank radiation electromagnetic waves, electromagnetic waves encountered in the medium when the reflection by the radar to receive, send and receive signals between the frequency difference δ f and the media surface distance R is a certain proportion: R = c (speed) × δ f (frequency difference) × 2 (FM slope) × K. As the speed of light C and the FM slope K are known, so the estimated frequency difference δ f can be found radar The distance R from the material surface of the installation place, then the total height of the tank is known and the space distance between the radar and the material surface is deducted, i.e., the height of the material level can be obtained.
Technical parameters
Application: temperature resistant, pressure resistant, slightly corrosive liquids
Measuring range: 30 meters
Process connection: thread, flange
Medium temperature: -40 ~ 250 ℃
Process pressure: -0.1～4.0MPa
Accuracy: ±3mm
Protection grade: IP67
Frequency range: 26GHz
Explosion-proof grade: ExiaⅡC T6 Ga/Exd ia IIC T6 Gb
Signal output: 4.... .20mA/HART (two-wire/four-wire) RS485/Mod bus
This paper addresses：https://www.fengtutec.com/technical/505.html
Next Article：Which brand of miniature weather station works well?
- Related products
- Related articles
-
06-252025
YW-26B Corrosive Liquid Level Sensor: Working Principle and Usage Guide
In industry, liquid level measurement of corrosive media is a critical process, and Corrosive liquid level sensors, such as the YW - 26B, are the primary application instruments. Below is a detailed explanation of the working principle and usage method of such level gauges.The YW - 26B Corrosive liq...
-
02-232023
Water level meter recommends a manufacturer's product
Water level meter is a product launched by Windway Technology, model FT-SW1, which can measure water level data of waters in real time, including rivers, lakes, reservoirs, dams and other areas. It uses a radar water level sensor that measures water level information in a non-contact manner using K-...
-
01-212025
an anemometer is used to measure what
an anemometer is used to measure what is wind speed and pressure, and is a common weather station instrument....
-
12-132023
Tunnel visibility tester for safe operation
Visibility in tunnels is something to be concerned about.Visibility inside tunnels is low, especially at entrances and exits, so drivers should always stay alert and turn on their headlights in advance so that they can stay safe even in low visibility conditions. At the same time, they should pay at...
Skype
whatsapp
mail