Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

Model:DHM2
Brand:fengtu
1.Working Principle of Wet Bulb Dry Bulb Thermometer
Wet Bulb Dry Bulb Thermometer is used to measure the temperature and humidity of the air. It is convenient to carry and has high precision, which is suitable for field survey.Fully wind up the spring of the Wet Bulb Dry Bulb Thermometer's ventilator and rotate the fan to provide a certain speed of air flow through two side-by-side thermometers, one of which has its mercury bulb wrapped with wet absorbent gauze.
Due to the evaporation of water on the gauze, the temperature of the thermometer drops. By comparing the temperature difference between the two thermometers (wet and not wet), the relative humidity, absolute humidity, etc. of the air can be calculated by looking up the table.
2. Main Applications of Wet Bulb Dry Bulb Thermometer
Measure the temperature and relative humidity of the air. Its structural characteristics are more suitable for measuring the temperature and relative humidity of the air in the field without power supply.
3. Wet Bulb Dry Bulb Thermometer Technical Parameters
| Operating temperature | -10℃~45℃ |
| Humidity range | 10%RH~100%RH |
| Scale range | -36℃~+46℃and-26℃~+51℃ |
| Minimum division value | 0.2℃ |
| Ventilation speed | ≥2.5m/s |
| Net weight of instrument | 1kg |
| Dimensions | 92.5mm×92.5mm×415mm |
4. Composition of Wet Bulb Dry Bulb Thermometer
It consists of two identical mercury thermometers and a ventilator, with a simple structure and strong workmanship.
water level sensor is a device that measures the level in a fixed container that is too high or too low. When the water level reaches a certain point, the sensor sends a signal to the relay for automatic water management....
The online ammonia nitrogen sensor is a device for real-time monitoring of ammonia nitrogen concentration in water, with a measurement range of 0-1000 mg/L. It utilizes a built-in pH electrode and temperature probe for dual compensation, improving measurement accuracy. It is suitable for vario...
China's water resources are relatively scarce, with a per capita share of about 2,000 cubic metres, far below the global average of 28 per cent. Since the founding of the State, the frequency of droughts in China has been rising, and the area affected by drought has been expanding year by year....
Duct air velocity measurement is a common operation in industrial production and environmental monitoring. Its main purpose is to monitor the flow rate of wind velocity inside a pipeline to ensure that the fluid (usually gas) inside the pipeline is within a controlled range.In industrial production,...